NH10-1R000B Part by Vishay Dale Electronics Inc with NSN 5905-01-324-0107 - Request a Quote Now

Part Number:  NH10-1R000B
Manufacturer:  vishay dale electronics inc
CAGE Code:  91637
NIIN:  013240107
Item Name :  resistor fixed wire
INC Code:  00010
Country:  USA
NCB Code:  01

For competitive procurement options on part number NH10-1R000B from Vishay Dale Electronics Inc (CAGE Code 91637), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number NH10-1R000B Details:

Part number NH10-1R000B is manufactured by Vishay Dale Electronics Inc and listed with the item name Resistor Fixed Wire. Classified under NSN 5905-01-324-0107, the NIIN of this item is 013240107, its INC is 00010, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 59 Electrical and Electronic Equipment Components and Class (FSC) 5905 Resistors. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NH10-1R000B

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part NH10-1R000B with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number NH10-1R000B with NSN 5905-01-324-0107, 5905013240107

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-324-0107

Item PartTypeName:

RESISTOR,FIXED,WIRE WOUND

59050132401070NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
NH-10 1 OHM .1223

Characteristics Data of NSN 5905-01-324-0107, 5905013240107

MRCCriteriaCharacteristic
AEFBPOWER DISSIPATION RATING IN WATTS10.000 FREE AIR
AEHYAMBIENT TEMP AT FULL RATED POWER60.0 DEG CELSIUS
AAPETEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-50.0 TO 50.0
AAQGAMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275.0
AGAVEND ITEM IDENTIFICATIONTTU-495/E
AAPPELECTRICAL RESISTANCE1.000 OHMS
AAQHTEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 275.0
AARGRELIABILITY INDICATORNOT ESTABLISHED
ADAQBODY LENGTH0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
AKNAINCLOSURE TYPEENCASED
CSCFTERMINAL TYPETAB,SOLDER LUG
STYLSTYLE DESIGNATORAXIAL TERMINAL (S)
AAPQRESISTANCE TOLERANCE IN PERCENT-0.100 TO 0.100
ABJTTERMINAL LENGTH0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
ADATBODY WIDTH0.405 INCHES MINIMUM AND 0.435 INCHES MAXIMUM
ADAUBODY HEIGHT0.375 INCHES MINIMUM AND 0.405 INCHES MAXIMUM
BYMLMOUNTING HOLE SIZE0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
CBMECUBIC MEASURE0.137 CUBIC INCHES



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top