D35EXXTXXXXB Part by Wanner Engineering Inc with NSN 4320-01-516-3474 - Request a Quote Now

Part Number: D35EXXTXXXXB

Manufacturer: wanner engineering inc

NSN: 4320-01-516-3474

CAGE Code: 59776

NIIN: 015163474

Item Name : parts kit hydraulic

INC Code: 28423

Country: USA

NCB Code: 01

FSG: 43 Pumps AND Compressors

FSC: 4320 Power AND Hand Pumps

For competitive procurement options on part number D35EXXTXXXXB from Wanner Engineering Inc (CAGE Code 59776), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number D35EXXTXXXXB Details:

Part number D35EXXTXXXXB is manufactured by Wanner Engineering Inc and listed with the item name Parts Kit Hydraulic. Classified under NSN 4320-01-516-3474, the NIIN of this item is 015163474, its INC is 28423, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 43 Pumps AND Compressors and Class (FSC) 4320 Power AND Hand Pumps. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D35EXXTXXXXB

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part D35EXXTXXXXB with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4320-01-516-3474, 4320015163474

MRC	Criteria	Characteristic
FEAT	SPECIAL FEATURES	PUMP CONFIGURATION: SHAFT DRIVEN. HYDRAULIC END CAM: MAX 35 GPM (132 LPM) AT 1150 RPM. DIAPHRAGM AND O-RING MATERIAL: BUNA-N. HYDRA-OIL: 40-WT FOR CONTINUOUS DUTY (USE WITH 316 SST OR HASTELLOY PUMP HEAD (STANDARD). D-35 HYDRAULIC END REPLACEMENT ASSEMBLY WHICH CONTAINS ALL DRIVE END COMPONENTS FROM THE DRIVE SHAFT UP TO AND INCLUDING THE DIAPHRAGMS. FACTORY TESTED AND SHIPPED WITH OIL.
AGAV	END ITEM IDENTIFICATION	PUMP,DIAPHRAGM D35-EASNHFECB
CXCY	III PART NAME ASSIGNED BY CONTROLLING AGENCY	REPAIR KIT,HYD END